Appearance Quality
The appearance quality of hotel furniture primarily requires a flat tabletop, fine workmanship, delicate decoration, and clear, beautiful grain. Guest room furniture typically uses particleboard, medium-density fiberboard, plywood, or laminate as the base material, and veneer materials such as thin wood, wood veneer, or three-plywood as the surface material. Different base materials and surface materials have different properties; neglecting these properties and proper usage methods often leads to warping. The structural characteristics of the surface material on the back and front of the board must be the same or similar. The moisture content of the base material is generally required to be 6-10%, and materials should ideally be from the same batch. During workshop processing, minimize the loading and pressing time. Different material properties and surface material moisture contents require different glue thicknesses, pressing times, and pressures.
Structural Strength
Guest room furniture is mostly fixed furniture, generally with a panel structure, using wood screws, hardware connectors, and adhesives for joining. When using materials, pay attention to the characteristics of different materials. For example, particleboard and medium-density fiberboard have poor nail-holding power and should be avoided in areas requiring frequent movement or strong nail-holding power, such as door hinge screws and drawer slide screws, as they are prone to loosening and making noise. Special attention should be paid to headboards, mirror frames, and wall hardware, or wood should be used for reinforcement. Currently, 45-degree inverted wooden frame structures are popular.
Material Costs
Use the lowest-cost materials possible while meeting the same usage requirements. While using large pieces of material, also consider using smaller pieces of the same type to improve overall board utilization. Guest room furniture is generally produced in large quantities; use computer-aided design for efficient material layout, combining large and small pieces to reduce material costs. Compare material costs for different structures.
High-Efficiency Production
With the same material cost, consider which materials are easier to process and which processes can save on processing costs and improve efficiency, especially in milling, routing, and carving processes. Which materials are easier to cut and produce a smooth finish?
Transportation and Installation
Hotels generally have high ceilings, requiring lightweight furniture for easy transportation. Especially for items like attached bed frames and extended desks, which cannot be transported by elevator, and which are typically removed from freight elevators during furniture installation, safe transportation requires special consideration regarding material weight and structure.
Safety Performance
While hotels generally don't have specific regulations on formaldehyde emissions, they do have fire safety requirements for furniture. Where permitted by the hotel, fire-resistant boards, heat-resistant paints, and flame-retardant fabrics can be used in certain areas. High-end hotels even require fire-retardant treatment of the wood used in furniture making.
All these factors need to be considered comprehensively and applied in practice. The functional requirements and design details of hotel furniture interact with the reasonable material structure and workshop process arrangements of Dio Hotel Furniture Company. It is recommended to strive to produce guest room furniture that meets hotel requirements while achieving efficient production and cost reduction. Utilizing professional processing techniques and equipment ensures that the produced furniture meets the comfort requirements of high-end hotels.
